Solutions

GTCAP Graphene Super Capacitor Use Guidance

2020-04-10

This GTCAP graphene super capacitor use guidance including recommending usage, hazard warning,storage,shipping and etc.


1. Recommending Usage

1.1 Please read the cell instructions and the label on its surface before use.

1.2 When in use, the environment temperature is over 35℃,the cell shall be cooled,kept out of heat, high voltage and avoided children’s touching. Do not drop the cell.

1.3 Use only approved chargers and procedures, improperly charging a cell may cause to flame or damage.

1.4 Do not touch contacts together. Do not demolish or assemble the cell by yourself. Do not put the cell in the damp place. When the cell was stored for a long period, put it well in its half capacity. Do not wrap it with conduct material to avoid the damage caused by the direct contact between the metal and cell. Keep the cell in day places.

1.5 Safely disposed the disused cell. Do not put it into fire or water.


2.  Hazard Warning

2.1 Forbid Disassemble Capacitor

Disassemble the battery will cause the capacitor heat, smoke, deformation or burn.


2.2 Forbid Short-circuit Capacitor

Do not connect the cell’s positive and negative with metal. Do not put the cell with metal together either storage or movement. If the cell is short circuit, there will be a large current flows through the cell, will cause the battery heat, smoke, deformation or burn and damage the cell.


2.3 Forbid Heat and Burn the Cell

If heating or burning the cell, it will caused the isolated element in the cell dissolved, protection function stopped or the electrode burning, over heated, which will make the cell heat, smoke, distort or burning.


2.4 To Avoid Use the Cell near the Heat

Do not use the cell near the fire, stove, or the environment temperature is over 80℃, and overheating will cause the cell internal short-circuit and make it heat, smoke, distort or burning.


2.5 Forbid Bathing the Cell

Do not dampen the cell, or even immerse it in the water, which will cause internal protection circuit and its function lost or abnormal chemical reactions, which will lead to heating, smoking, distortion or burning.


2.6 Danger in Using Non-indicated Chargers to Charge the Cell

Do not charge the cell with a current or voltage higher than the specified maximum value in this specification. Prohibit reverse charging of the cell. Charging in abnormal condition, will cause internal protection circuit and its function lost or abnormal chemical reactions, which will lead to heating, smoking, distortion or burning.


2.7 Forbid Damage Cell

Do not allow damage the cell with the metals gouged, forged or dropped etc.,otherwise, it will cause overheating, distort, smoke or burning, even in danger.


2.8 Forbid directly welding on the Cell

Over-heated will cause the isolated element dissolved in the cell and losing protective function, even will cause overheating, distort, smoke or burning.


2.9 Do not Touch the Leak-out Cell

The leak-out electrolyte will cause the skin uncomfortable. If it drops into eyes, do not rob the eyes but wash in time, and go to hospital for treatment immediately.


2.10 Do not Mixed-using Cells

Avoid of old and new or different types, different specifications and different chemical composition of the cells matching use.


2.11 Other Warnings

Do not put the cell into microwave, washing machine or drying machine. Do not use a damaged cell.


2.12 Others

GTCAP shall make no liability for problems that occur when the above specifications are not .


3. Storage

The cell shall be stored in the clean and dry ventilation room at the temperature of -10℃~45℃ and shall be kept out of fire or heat and avoid touching corrosion elements. The cell should be stored with 50%~60% charged condition. We recommend that cells should be charged about once per half a year to prevent over-discharge.


4. Shipment Requirement

The cell should be packed in cartons under the condition of 50%~60% and at the temperature of -10℃ ~45℃ charged for shipment. The violent vibration, impaction or squeezing should be avoided in the transport process.


Avoid to be exposed to the sun and rain. The cells shall be shipped by normal transportation such as by road, by train, by ocean or by air.


5. Other Chemical Reactions

Because capacitors utilize chemical reaction, cell performance will deteriorate over time even if stored for a  long period of time without being used. In addition, if the various usage conditions such as charge, discharge, ambient temperature, etc. are not maintained within the specified ranges the life expectancy of the cell may be shortened or the device in which the cell used may be damaged by electrolyte leakage. If the batteries cannot maintain a charge for long periods of time, even they are charged correctly, this may indicate it is time to change the cell.


6. Disposal

Do not dispose of capacitors in trash. Dispose of according to local regulations.


7. Period of Warranty and Product Liability

Warranty period of this product is 360 days from manufacturing code. We guarantee to give a replacement in case of cells with defects proven due to the manufacturing process instead of abuse and misuse by the customers,otherwise, GTCAP are not promised free replacement.


Please contact the manufacturer when you meet any question with GTCAP products.

Leave a message Welcome to GTCAP
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

Contact